Electrical data:
- Rated voltage, frequency: 230 VAC / 50Hz
- Power consumption: max. 350 VA
- Fuse mains side: 2 x T3,15A H 250V
- Fuse internal: T1,0A L 250V
- Schalldruckpegel: < 48 dB(A)
- Protection class: Protection class I
- Application part (breathing mask): Type B
- Operating mode: Continuous operation
- IP classification: IP 21
Dimensions:
- Dimensions: 535 x 203 x 520 mm (H x W x D) without rollers
- Weight: 19.9 kg
Storage and transport conditions:
- Storage temperature: -25 to +70°C
- Humidity: 15 to 93% RH, non-condensing
- Air pressure: 700 to 1060 hPa
Operating conditions:
- Operating temperature: -5° to +40°C
- Humidity: 15 to 93% RH, non-condensing
- Air pressure: 700 to 1060 hPa
- Working altitude: max. 3000 m above sea level
Performance data:
- O2 concentration at 0.1 to 5 l/min: 93 % +/- 3 % 1)
- O2 concentration at 5 to 6 l/min: 90 % +/- 3 % 1)
- Volume flow: 0.1 - 6 l/min 1)
- max. recommended flow rate: 6 l/min
- max. outlet pressure: 55 kPa (normal condition), 275 kPa (initial fault)
- Ion concentration: 5 million/cm3 (+/- 20%) at 4 l/min
1) O2 concentration and flow rate data apply over the full range of operating conditions specified above.
2) Flow rate data at: Room temperature and air pressure, dry air.
Software version:
- Oxygen concentrator:
Software version is briefly displayed on the LC display of the oxygen concentrator after it is switched on. - Ionizing unit:
Software version is shown on the display of the ionizing unit for 10 seconds after switching on.
Subject to technical changes!